Réacteur post colonne PRCM
- Constructeur
- Waters
- Réf. HTTS
- HTS-SA-0306
- Réf. HTDS
- REACTEUR POST COLONNE PRCM
- Division
- Sciences Analytiques

Description
Ce module de réaction post colonne contient un « reaction coil » de 1met un échangeur de chaleur à contre courant. Il est utilisé avec un ou deux réactifs afin de réaliser des réactions de dérivatisation post séparation. Par exemple pour la dérivation des acides aminés ou tout autre réaction chimique permettant la détection des molécules d’intêrets.
La température peut être réglée de la température ambiente à 120°C et dispose d’un système de sécurité
Pour une grande diversité d'applications !
Caractéristiques
- Module de réaction post colonne
- Accroît la sensibilité et/ou la sélectivité de la méthode chromatographie HPLC
- La température est contrôler via le module de contrôle de température « TCM » WATERS
Spécifications techniques
- D
- RXN 1000 Coil Care and Use
- F
- Startup Kit 2-2
- D-2
- RXN 1000 Coil Care and Use
- D-4
- RXN 1000 Coil Care and Use
- D-6
- RXN 1000 Coil Care and Use
- Tip
- The preset values are ambient for the lower limit and 120°C for the
- Attn
- Order Processing Department
- Call
- *1-800-252-4752 - Customer Sales Department
- Knob
- connections to LC
- viii
- Table of Contents
- Telex
- 174166 or 174128
- Topic
- Page
- Width
- 16.51 cm (6.5 inches)
- Height
- 58.42 cm (23.0 inches)
- SS Tee
- WAT075215
- Symbol
- Definition
- 115 Vac
- 60 Hz (57-63) 2.5 A
- 230 Vac
- 50 Hz (47-53) 1.25 A
- Achtung
- Jedwede Änderungen oder Modifikationen an dem Gerät ohne die
- Caution
- If the exposed PTFE tubing at either end of the RXN
- Contact
- Quality manager
- Warning
- To protect against fire, replace fuses with those of the type
- • Tee
- 316 SS, 90° port, low-dead volume design which accepts 1/16”
- Accuracy
- temperature probe at designated point
- Atencion
- cualquier cambio o modificación efectuado en esta unidad que no
- Humidity
- 10 to 90% non-condensing
- Internet
- The Waters Web site includes contact
- Vorsicht
- Zum Schutz gegen Feuer die Sicherungen nur mit
- WAT21817
- 12 NM PEEK Ferrule Used to make
- • Coil
- 0.018 inch ID polytetrafluoroethylene tubing knitted in a
- Attention
- pour éviter tout risque d'incendie, remplacez toujours les
- Important
- Toute modification sur cette unité n’ayant pas été expressément
- Line cord
- Voltage TP01693
- Mail Stop
- CS
- Telephone
- +44-161-946-2400
- WAT021815
- 12 NM Compression Used to make
- WAT021816
- 12 Compression Fitting Used to make
- WAT031795
- 1 PEEK Tubing Cutter Used to cut connection
- WAT038051
- 1 Fuse Holder Fuse replacement
- WAT038130
- 1 Fuse, 1.25A 250V Fuse replacement
- WAT072919
- 1 Fuse, 2.5A Fuse replacement
- WAT097559
- 1 Fuse Carrier 5 × 20mm Fuse replacement
- connector
- selection
- 2.5 A Fuse
- WAT072919
- Attenzione
- per garantire protezione contro gli incendi, sostituire i
- Avvertenza
- qualsiasi modifica o alterazione apportata a questa unità e non
- Connect to
- to waste
- Dimensions
- 9.21 x 58.42 x 16.51 cm
- Laboratory
- Handling and Disposal of Chemicals.
- • Jacket
- anodized aluminum tube and endcaps
- • Volume
- coil volume in μL is designated by descriptive number; e.g.,
- Advertencia
- Para evitar incendios, sustituir los fusibles por aquellos
- Description
- Part number
- Part number
- Quantity Item
- Temperature
- +/- 0.1 °C from day to day
- 1/16 inch OD
- connections to LC
- Installation
- D-3
- Introduction
- D-2
- • Fittings
- 1/16” compression screws and ferrules made of PEEK
- 71500017204 1
- Installation Guide, User installation and
- column outlet
- TP01701
- control cable
- Fuse socket
- Caution symbol
- A-5
- Recycle symbol
- Do not dispose in municipal waste.
- fitting (Blue)
- Connect
- reagent pump 1
- from
- reagent pump 2
- Waters
- 1 Year Warranty
- Switches and Sensors
- 30 Day Warranty
- Replacement Parts and Service Workmanship
- 90 Day Warranty
- Cables
- Design features
- 1-2
- Nominal voltage
- Frequency range Fuse rating
- Safety features
- Line fusing
- Warning symbols
- A-3
- Expendable Items
- Ferrules, Compression Screws, Fuses, Tubing, and
- bulkhead fitting
- Detector from
- Contacting medium
- Information
- Conventional mail
- Waters Corporation
- Dimensions Length
- 9.21 cm (3.625 inches)
- Power consumption
- Nominal 20 W
- RXN 1000 Coil Kit
- 030805
- Screw 10-32 Short
- connections to LC
- Table of Contents
- ix
- Temperature Range
- Ambient to 120 °C
- burst warning A-3
- mass spectrometer shock hazard A-4
- ISM Classification
- ISM Group 1 Class B .......................................................... v
- Operating the PCRM
- 3-3
- Selecting the site
- 2-2
- Unpacking the PCRM
- 2-2
- caution symbol A-5
- Ordering information C-4
- Maximum temperature
- 120 °C at 450 psi for 72 hours
- Reaction Coil Clamp
- 700000980
- SS Bulkhead Fitting
- WAT070216
- Storage temperature
- 40 to 70 °C
- Ordering information
- D-5
- Powering up the PCRM
- 3-2
- Temperature Setpoint
- +/- 0.5 °C at 80 °C measured with
- Gamme de température
- ambiante à 120°C
- PEEK Tubing Kit, PCRM
- 700000984
- Temperature Stability
- +/- 0.5 °C under identical conditions
- biohazard warning A-5
- M
- Electrical connections
- 2-3
- Equilibrating the PCRM
- 3-4
- RXN 1000 reaction coil
- 1-3
- Thermal Switch 125 °C
- 700000978
- audience and purpose v
- intended use v
- flammable solvents A-4
- symbols
- Limited product warranty
- C-3
- Making fluidic connections
- 2-5
- Helpful hints and precautions
- D-4
- Stabilité de la température
- +/- 0.5°C
- • Maximum Operating Pressure
- 500 psi (3.4 MPa)
- Electrical and handling symbols
- A-12
- Précision température établie
- +/- 0.5°C à 80°C
- • Maximum Operating Temperature
- 120 °C
- CHEX countercurrent heat exchanger
- 1-3
- material that might contain biohazards
- substances that contain biological
- Shipments, damages, claims, and returns
- C-5
- Environmental Data Operating temperature
- 10 to 40 °C
- Warnings that apply to all Waters instruments
- A-9
- RXN coil materials of construction/specifications
- D-2
- • 비금속(Nonmetallic) 튜브를 테트라히드로푸란(Tetrahydrofuran
- THF) 또는
Conformités et normes
Fiche produit HTTSystems
Téléchargez la fiche technique à nos couleurs et coordonnées, ou consultez-la en plein écran.
Demander un devis
La référence HTS-SA-0306 est reportée dans votre dossier. Vous complétez le contexte, un ingénieur reprend la suite.
Demander un devisParler à un technicien
Une question d'installation, de consommables ou de compatibilité avant de chiffrer ? Nos ingénieurs vous répondent depuis Douala.
Poser la questionÀ rapprocher de cette fiche
Même famille, ou à défaut même division.




