Analyseur de COT M9

Galerie et schémas techniques

Description

Caractéristiques

• Deux fois plus rapide que la génération précédente d’analyseurs COT, le temps d’analyse est de 2 min
• Etalonnages, Vérifications métrologiques, Validations automatiques et rapides.
• Maintenance réduite — moins de 2 heures par an
• Cartouches de réactifs internes — Ne nécessite ni gaz vecteur ni réactifs externes

Spécifications techniques

D

40.0 cm (15.8in) D: 26.5 cm (10.4 in) D: 46.4cm (18.3 in)

H

42.2 cm (16.6in.); W: 24.6 cm (9.7in); H:54.9 cm (21.6 in); W: 45.0 cm (17.7 in); H:39.5 cm (15.4); W: 22.9 cm (9.0in);

Fuses

T 1.6 A 250 VAC Fuse (Slow Blow), size 5 x 20 mm appliance inle

Power

100 – 240 V~, 50 – 60 Hz, 100 VA

Range

0.03 ppb to 50 ppm

Turbo

X X X

Weight

9.4 kg (20.6 lb) 15.8 kg (34.9 lb) 9.4 kg (20.8 lb)

Display

7” WVGA 800x480 pixel, Color LCD w/touch-screen

Sievers

Certified Plus reference materials technical support as well as on-site installation,

Accuracy

± 2% or ± 0.5 ppb, whichever is greater

DataGuard

X X X

Precision

< 1% RSD

M9 and M9e

M9 and M9e M9 and M9e

Calibration

Typically stable for 12 months (TOC and Optional Conductivity )

Sample Type

Autosampler or discrete grab sample On-line continuous or discrete grab sample

flexibility

Sievers’ legacy

Analysis Time

2 minutes (4 seconds with the optional Turbo mode)

M9 Laboratory

M9 On-Line M9 Portable

System (iOS).

external standards and samples. This unique

• Turbo mode

Now available in on-line, grab, and

Display Readout

3 significant digits

Sample Pressure

n/a 100 psig

Enclosure Rating

n/a IP-45 IP-21

Maximum Altitude

3,000 m (9,800 ft)

Pollution Degree

2

troubleshooting.

M9 On-Line Analyzer interface

On-Line Flow Rate

n/a >50 mL/min (for on-line mode)

Ambient Temperature

5-40 °C (41-104 °F)

Laboratory Analyzer

On-Line Analyzer PortableAnalyzer

Sample Conductivity

X X

Sample Temperature1

5-95 °C (41-203 °F)

of these industries

requirements:

Autosampler/DataPro2

X X

whichever is greater

whichever is greater

Conductivity Accuracy

±0.005 μS/cm or ±1% n/a ±0.005 μS/cm or ±1%,

Safety Certifications

ETL. CE

superior productivity

uninterrupted analysis: genuine versatility:

Conductivity Precision

<0.25% RSD n/a <0.25% RSD

Raw Conductivity Range

0.01 to 2,000 μS/cm n/a 0.01 to 2,000 μS/cm

UPW Loop, UPW Make-up,

• Chinese Pharmacopeia (CP) Appendix VIII R

USB device port (1), USB

4-20 mA outputs (3); alarm outputs (4); binary input (1);

state, and federal laws.

Boulder, CO 80301-3687 USA

Maximum Relative Humidity

0-95%, non-condensing

use valuable bench space.

for ultrapure water analysis and

analysis, even in the lab.

and pharma (cleaning validation.)

Instrument Sample Flow Rate

0.5 mL/min

ed enclosure to withstand de-

ples, automated analysis with the

host ports (3), Modbus TCP/IP

USB device port (1), USB host ports (2);Modbus TCP/IP

or connect to the Sievers Au-

grab samples and standards. for TOC analysis anywhere.

of sample matrices and concen-

ronments. or On-Line mode.

M9 TOC Analyzers meet the needs

The M9 TOC Analyzers are engineered to meet stringent regulatory

• pharmaceutical applications

• US Pharmacopeia (USP) <643> and <645>

pability for simultaneous testing

or On-Line mode.

via sample vials and sipper tubes

ability to easily introduce discrete pact design can be hand-carried

• Measure discrete grab samples

• Continuous monitoring with the • Lightweight, IP-21 rated, com-

• Optional Turbo mode for rapid

electronics (reclaim applications)

• Broad, linear TOC range allows

• Designed for at-line cleaning val-

• Inorganic Carbon Remover (ICR)

Improves TOC ac-

• Wall-mounted with an IP-45 rat-

• Measures discrete grab sam-

• Well suited to analyze a variety

manding process water envi- optional Sievers Autosampler,

• Optional Stage 1 conductivity ca-

surements for grab, Autosampler,

are equipped with the Sievers Membrane

the continuous sample source or changing the

• Offers a small profile to efficiently

excellent low-level sensitivity idation applications.

Method and the Integrated On-Line Sampling

(iOS) System enables easy introduction of

strive to exceed expectations by providing

with uncompromising analytical performance,

Conductometric Detection method. Exhibiting

sample inlet configuration. The iOS system also

a dynamic range of six orders of magnitude,

accommodates grab samples for spot checking

Our Analytical Instruments team has acquired

depend on.

including the Sievers Membrane Conductometric

Our proprietary Integrated On-Line Sampling

As the world’s leading manufacturer of Total

time, resulting in unmatched stability in our

our technology prevents significant drift over

TOC from other locations in a water system.

Organic Carbon (TOC) Analyzers, we continuously

instruments. Less frequent calibration, combined

represent a comprehensive offering of ready-to-

maintenance, calibration, validation, and training

Unlike other instruments that use non-dispersive

calibration, validation, and system suitability

for 21 CFR Part 11 and Annex 11 requirements for

ples or identify transient TOC excursions.

infrared (NDIR) detection, Sievers TOC Analyzers

standards without removing the instrument from

Plus ensures you have a reliable and accurate TOC

of Sievers Standards, even at low concentrations.

nance, and warranties to aftermarket consumables,

preparing and storing standards allows us to

superior technology, design, quality and service.

makes our analyzer the workhorse you can

use TOC standards for calibration, linearity, and

services.

24+ hours of unattended sample analysis (63 or 120

conductivity in discrete grab samples.

Protect your TOC Analyzer investment with our Certi-

USP system suitability. Our large-scale production

fied Plus genuine products and expert services. From

capabilities provide substantial cost advantages

pler with the M9 analyzer, enabling time-saving fea-

levels.

on-site validation and start-up, preventative mainte-

over in-house preparation. Our expertise in

such as reagent packs, standards and vials, Certified

guarantee the accuracy and extended shelf life

• DataPro2 software integrates the Sievers Autosam-

curacy for samples with high inorganic carbon (IC)

• DataGuard software provides full compliance support

four-second analysis time to quickly analyze sam-

up and easy to use. The M9 is fast, smart, versatile and

M9 Laboratory Analyzer interface

• The high-capacity Sievers Autosampler enables • Sample conductivity

Measure and report sample