Potentiostat galvanostat Modulab XM Series

Galerie et schémas techniques

Description

Caractéristiques

• Conçu autour du meilleur système d’analyse du marché le Modulab XM
• Totalement adapté à vos besoins

Spécifications techniques

Tel

(865) 425-1289 Tel: +44 (0) 1252 556800

Ranges

Pstat 300 mA to 30 nA

-studio

software easy as 1... 2... 3... 4...

Slew rate

>10 V/μs

Connections

Differential input

EchemLab XM

Tension de polarisation 100V, Courant A, EIS 10µHz à 1Mhz

SolarLab XM

Tension de polarisation 8V, Courant 300mA, EIS 10µHz à 1Mhz, banc optique intégré

EnergyLab XM

Tension de polarisation 8V, Courant 2A, EIS 10µHz à 1Mhz

and filtered

Single Sine Linear / logarithmic

Booster ±2 A

Accuracy (ratio) ±0.1%, ±0.1°

Cable Shields

Driven (3T) / Ground (4T)

DC Measurement

Synchronized to RE

Frequency error

±100 ppm

Input impedance

>100 GW, <28 pF (3T)

Maximum current

Pstat ±300 mA

Cell connections

2, 3, or 4 terminal Maximum sample rate 40 MS/s

Input bias current

<10 pA

Maximum resolution

1.5 pA

the diagram in the

and automatically generate

Maximum time record

Unlimited

and click “Run”

word processor software

Frequency resolution

1 in 65,000,000

Create new experiment

Select Step type Check your cell Analyze the data using

Floating measurements

yes

Reference Inputs (RE)

Impedance Accuracy

Counter Electrode (CE)

Signal Output

Instrument Connections

CE, WE, RE, LO Frequency range 10 μHz to 1 MHz

Minimum pulse duration

1 μs

“Experiment” menu,

reports using your favorite

Maximum ADC sample rate

1 MS/s

Potentiostat/Galvanostat

Frequency Response Analyzer

Current polarization range

Pstat ±300 mA Analysis channels

Maximum voltage Measurement

±8 V

1 2 (Impedance in this case)

3 connections - match 4 equivalent circuit fitting,

Recommended current scan rate

1 kA/s to 200 μA/s Analysis channels RE, WE, Aux A/B/C/D

Recommended voltage scan rate

25 kV/s to 1 μV/s Anti-alias, digital filters, DC bias reject Automatic

Impedance measurement bandwidth

1 MHz (via FRA)

Minimum ∫time per measurement

10 ms

Differential Auxiliary Electrodes

4 (same spec. as RE)

Smooth “analog” scan generator

64 MS/s interpolated Waveform Single sine, multi-sine

Compliance voltage range (floating)

±8 V

Polarization V/I error (setting+range)

0.1% + 0.1% DC Bias rejection Automatic

Accuracy (reading % + range % + offset)

0.1% + 0.05% + 30 fA

Voltage polarization (and compliance) range

±8 V Multi-sine / harmonic frequencies All or selected

battery / fuel cell / supercapacitor research.

range of internal and external power boosters. These example

Measurement) product that is primarily focused on

impedance measurements in the micro-ohm region using a wide

EnergyLab XM is an application specific XM (Xtreme

The EnergyLab XM is able to make very accurate, extreme low

[email protected] www.solartronanalytical.com

©Copyright 2016 AMETEK, Inc. All Rights Reserved

Bandwidth (decade steps) 1 MHz to 10 Hz Analysis modes

Single sine, FFT, harmonic

Applications

• EnergyLab XM : Toutes les mesures liées à la caractérisation et à l’étude des piles, batteries, piles à combustibles…
• EchemLab XM : Toutes les mesures liées à l’étude de la corrosion, du coating et là l’élécrochimie analytique
• SolarLab XM : Toutes les mesures de photo-électrochimie (caractérisation des cellules solaires, analyse de la photo-synthèse…)