Potentiostat galvanostat PARSTAT MC

Gallery and technical drawings

Description

Key features

• Une modularité unique : 1 à 20 voies dans un seul châssis
• Construit entièrement à partir de blocs fonctionnels remplaçables par l’utilisateur : Alimentation électrique, fond de panier et ventilateurs. Le châssis n’aura jamais à quitter votre laboratoire une fois installé Conception modulaire ne nécessitant pas de retour à l’usine pour SAV
• Options disponibles : ±20A max, EIS 7MHz à 10µHz, polarisation ±30V de Polarisation, électromètre très bas courant, battery holders (18560, coin cell, AA, AAA)….
• Masse flottante pour tester plusieurs échantillons dans une même cellule

Technical specifications

Tel

(865) 425-1289 Tel: +44 (0)1252 556800

PITT

Recurrent Potential Pulses

Rate

detection of biological Corrosion

7 MHz

materials analysis investigations

MORE?

the most common tests on energy devices.

6-WIRE

measurements and multiple

Energy

Corrosion

±2 mA

±4 nA down to ± 4 pA ±4 nA

PARSTAT

MC Family

PMC-200

PMC-1000 PMC-2000A

feature

allows for

Software

VersaStudio, VDK*

2032BATT1

Coin Cell Battery Holder

2032BATT2

Coin Cell Battery Holder

6 V Range

Accuracy for single cell tests Resolution for aqueous testing Resolution for LPR and ZRA

Impedance

EIS fast, accurate, included

coatings.

Power CCD

30 V Range

Pb-Acid batteries electrophoretic deposition oxides

evaluation

EIS, Rp-versus-

techniques

corrosion cells providing Measure OC

1000 kS/Sec

species and rapid kinetics

24-Bits ADC

Highest quality voltage and current resolution for measured responses

Low Current

Analysis of ultramicro and

Part Number

VersaSTAT-LC

VersaStudio

Potentiostatic

High Current

Market leading high current

Model Number

Option The Corrosion Cell Kit’s configuration is modeled

The advanced

Electrochemical

scans Charge

Galvanostatic

nanobatteries

rates; EIS measurements on

Development of

Determination of low corrosion

Specifications

PARSTAT MC PARSTAT MC PARSTAT MC

rate constants

Cyclic and fuel cells under DC Potentiostatic EIS

BOOSTER P10A/6V

In Chassis Booster -1 to +6 V, ±10 A

Battery Holders

Model Number Option for PMC-1000

PARSTAT MC 1000

Polarisation ±10V, Courant (4nA à 2A), EIS (1 MHz à 10µHz), 16 Bits

iR compensation

feature allows for

Data Acquisition

Fast scan rate CVs for

PARSTAT MC 2000A

PARSTAT MC 1000

Wave Voltammetry

Failure analysis:

potentiostat did

The PARSTAT MC 200 (PMC-200) provides core

sensor research,

of electrochemical cells, GITT

20 NiMH batteries

CE and nonaqueous electrolyte concrete

24-bit Resolution

Compatibility EIS to 7 MHz

and Capacity (Ah)

Galvanic Corrosion

electrodeposition

Fast Analysis of

functional blocks

power supply, backplane,

Capacity-vs-Cycle,

etc. These techniques include:

Compliance Voltage

±10 V ±12 V ±30 V

Differential Pulse

DAC Output Control

Electroplating and

Time Delay

Fast transients in

Oversampling and averaging Energy Physical Echem

High Frequency EIS

Solid-state energy Kinetics and mechanism

Max Current Output

±1 A, per channel ±2 A ±1 A

PMC-200 PSTAT Card

Dual Channel

(238 fA resolution)

(122 fA down to 122 aA) (122 fA resolution)

EIS Frequency Range

Defined by PSTAT with an option for a larger exposed area. A

PARSTAT MC BOOSTERS

PARSTAT MC ACCESSORIES

PMC-1000 PSTAT Card

AC/DC

Voltammetry, Square

Email

and Recurrent Pulse

electrochemical and

techniques that are

MC channels. This

Carte PARSTAT MC 200

Polarisation ±10V, Courant 2µA à 1A, EIS (100 KHz à 1mHz), 24 bits, 20 voies max par châssis

Polarization Voltage

Allows the study of Large voltage fields for materials that form robust

scan, step and pulse

standard on PARSTAT Constant Power

2-Channels per Module

Low Current Interface 6-WIRE Standard

6 Li-ion batteries or

counter electrodes (CE), frits on environments such as rebar in area electrodes

Applied Current Range

± full scale per range PMC FAN01 Fan module

Carte PARSTAT MC 2000

Polarisation ±30V, Courant (4nA à 1A), EIS (7Mhz à 10µHz ), 18 bits

Data Acquisition Rate

250 kS/sec (4 μs)

LOW CURRENT INTERFACE

PARSTAT MC FAMILY SUMMARY

Studying stacks up to

Tolerates the use of smaller Studies in low conductivity and use of high surface Study of large samples

investigate trends of

Deposition

not impact each other

per Card

Coatings and inhibitor

Fast Potential Pulses

Device characterzation

Polarization (LPR), Split

EIS and delay steps to

Condition

Semiconductor analysis

Purge

installed at any time.

PMC-2000A

modes for smooth, fast

including State-of- EIS Mott-Schottky

provides a range of DC

Staircase Linear Scan Voltammetry

studying the impedance

CC-CV

analytical measurements

SequenceRun External Application

important in analytical

provides a range of fully

windows, concentration,

Characterizing batteries

Applied Current Accuracy

± 0.5% of range, ± 0.5% of reading PMC PWR01 Power supply module

Standard Maximum Current

1 A Polarization Voltage ± 10 V

Voltammetry in different

current load conditions, Galvanostatic EIS

information on electrode

Auxiliary Interface

Physical Electrochemistry

Impedance

measurements of Anode and

Measurements of a pH probe

more... DC and AC current

more... system options

potentiostat marketplace.

PMC-2000A PSTAT Card AC/DC Data Acquisition Rate 500 kS/sec (2 μs)

supercapacitors, and fuel

Multi-Vertex Scan

Anodization of Titanium or

4 nA Standard nanoelectrodes

Auxiliary Voltage (6-WIRE)

Standard

Current Measurement Ranges

12 decades, 200 mA to 4 pA other channels are in operation.

coatings, rebar corrosion,

Chronoamperometry

devices such as batteries,

Staircase Cyclic Voltammetry (multiple cycles)

electrochemical capacitors

for noise reduction

MORE… potentiostat models

The foundation of the PARSTAT MC is the smart-

Potential (V), Current (A),

Noise in ZRA mode

electrochemical measurement

Staircase Cyclic Voltammetry (single)

battery, fuel cell analysis.

cells, corrosion and

Data acquisition variables to

Cyclic Polarization, Normal Pulse Voltammetry

MORE… dynamic current range

measurement (red). PMC-200 shows

current resolution to 122 aA.

any PARSTAT MC family variety, up to 20 PMC-200 Dual PSTAT Channel AC/DC

Designed by engineers with 50+

performer in resolution. Each channel

Max. Current Range, Resolution

± 200 mA, 10 μA 223945 PMC-1000 Cell cable (2 m)

Min. Current Range, Resolution

± 4 pA, 122 aA

offices and authorized agents.

USA Europe

Cathode or a single cell during

or compliance voltage

in common/standard form factors

18650BATT2 18650 Battery Holder

inhibitors, biomedical implants

Chronopotentiometry

PMC-1000 or PMC-2000A completely

AABATT1 AA Battery Holder

years of potentiostat design and

PMC-200 PSTAT Card AC/DC

(2032) and a flexible screw-based

AAABATT2 AAA Battery Holder

holders are designed in a slim form

Model Number Option for PMC-2000A

including - 18650, AA, AAA, coin cell

AABATT2 AA Battery Holder

Maintains electrical isolation of each

Energy

for the PARSTAT MC connect directly to

18650BATT1 18650 Battery Holder

the optional ZSimpWin software package

provides a range of (EIS) capabilities are Constant Resistance

more... low current range and resolution

more... details

Running on Princeton Applied Research’s

User Replaceable Modules:

electrodes; asynchronous experiments will

Dual-Channel

experimental sequences. Uniform corrosion

Linear Voltammetry, Pulse

reduces both space and cost. Boosters can

Compatibility PMC-1000 reference electrode is included.

The PARSTAT MC Booster extends the already

Glassware

Using the same chassis as the potentiostat

Data Acquisition Rate Defined by PSTAT platinum mesh counter electrode and an Ag/AgCl

acquired, and stop limits Galvanic couples

Galvanic Zero Resistance Ammeter (ZRA)

to 20-Amps. The voltage range tests single

Standard Maximum Current 10 A per

channels. Each potentiostat card provides a

PMC-1000 PSTAT Channel AC/DC

improvement of current range to 4 pA and of

with up to ten (10) potentiostat modules of PMC CHS08A Chassis

instruments from Princeton Applied Research

Constant Resistance control Non-uniform corrosion: Differential Pulse Voltammetry

interruptions while allowing for high-speed

feature allows for

wide range of functionality as standard and

PMC-2000A PSTAT Channel AC/DC

PMC-200 uses advanced concepts to reduce the

Standard Lowest Current Range 2 μA (238 fA res.)

PMC-2000A potentiostat and galvanostat. With

native current range of the PMC-1000 allows for

The PARSTAT MC potentiostat family has reset

The PMC-1000 potentiostat was designed with an

format. The PMC-200 was designed to excel at

Compliance Voltage ± 10 V

installs in the same chassis. Configure your

PMC AUX01 Digital AUX cable (1 m)

be ordered at the original purchase or easily

PMC-1000/DC

series of potentiostats up to 10-Amps. Two of

Compliance Voltage -1 to +6 V Flat Cell Kit K0235

impedance, applied voltage range and frequency

Number of Current Ranges 10 ranges Standard Lowest Current Range 4 nA

number of discrete components, allowing double

Voltage, Current Resolution 24-bits

the capacity per module, while remaining a top-

EIS Frequency Range 100 kHz to 1 mHz

of applications and techniques from corrosion to

PMC-1000/DC PSTAT Card DC only

potentiostat alone. When added, there is a 1000x

Each PARSTAT MC chassis can be configured Configurable Modules:

cells, cells stacked in parallel, or many plating

Combines to 20A geometries. The exposed sample area is 1 cm2

expectations with the unparalleled research grade

extensive range of applications in mind. The wide

these boosters can connect in parallel to increase

Polarization Voltage -1 to +6 V

© Copyright 2021 AMETEK, Inc. All Rights Reserved

Fax: (865) 481-2410 Fax: +44 (0)1252 556899

range, all as standard features of the PMC-2000A, it

EIS Frequency Range 7 MHz to 10 μHz Number of Current Ranges 10 ranges

market leading specifications in current range, input

Standard Lowest Current Range 4 nA Standard Maximum Current 2 A

potentiostats and boosters. The chassis utilizes user-

16x more detail.

such as filters and acquisition modes, to maximize data quality.

sensors, batteries, fuel

Cut, copy, paste actions for more convenient multi-step experiment setup

for actions that include Corrosion, Electrochemical

impedance electrometer and additional current ranges) and the cell leads.

for different experiments on distinct cells or in

sits atop our potentiostat family and the multichannel Data Acquisition Rate

1000 kS/sec (1 μs) EIS Frequency Range 1 MHz to 10 μHz

Our Global Support Team provides insight from our thousands of users to create

Current CCDPL

Applications

• Piles à combustibles
• Batteries
• Corrosion
• Recherches électrochimiques